Sterilization Verification Indicators
Sterilization Verification Indicators
Thermo Scientific™ 3M™ Comply™ Indicator Tape
Enables CSSD and OR personnel to know at a glance that the packs have been exposed to the sterilisation process. 3M™ Comply™ Indicator tape changes colour or turns darker when exposed to the sterilisation process.
3M™ Attest™ Biological Indicators
Monitors the effectiveness of the steam sterilization process and provides results within 48 hours of incubation. 3M™ Attest™ Biological Indicators provide the best assurance of sterility by challenging the sterilizer with quantifiable, highly resistant spores.
Kartell™ Sterilization Indicator Tape
Indicates sterilization with simple color change of white to brown. Kartell™ Sterilization Indicator Tape is used with autoclaving or dry heat sterilization methods.
Promotions are available
3M™ Comply™ Bowie and Dick Autoclave Test Pack
The Bowie and Dick test is carried out daily in an empty chamber and is designed to show the adequacy of steam penetration.
TST™ TST™ Control™ Self Adhesive Emulating Indicator Strip
Place the TST™ Control™ Self Adhesive Emulating Indicator Strip inside trays, packs or pouches when autoclaving so the indicator will confirm that good quality steam has penetrated to the point of placement.
3M™ Attest™ Vaporized Hydrogen Peroxide Tri-Metric Chemical Indicator Strips
Verify that the stated values for exposure time, temperature, and amount of vaporized hydrogen peroxide have been achieved within a package or containment device and/or at a specific location within the load or empty chamber.
Brand™ Self-adhesive Sterilization Indicator Tape
Contains thermo-active pigments. BRAND™ Self-adhesive Sterilization Indicator Tape turns brown after autoclaving.
Promotions are available
3M™ Attest™ Rapid Readout Biological Indicators
Monitors the effectiveness of the steam sterilization process and provides results within 3 hours. 3M™ Attest™ Rapid Readout Biological Indicators provide the best assurance of sterility by challenging the sterilizer with quantifiable, highly resistant spores.
Microspec™ Steam Sterilisation Indicator Strips
Predicts completion of autoclave cycle
3M™ Comply™ Indicator Tape
3M™ Comply™ Indicator Tape is an integral part of a coordinated sterilization control system.
Steris™ Browne™ Control™ Autoclave Indicator Valves
Test the efficacy of an autoclave using Browne™ Control™ Autoclave Indicator Valves. These tubes contain heat-sensitive dyes that change color after sufficient time at the autoclave's desired temperature.