Water Purification
Water Purification
Devices, filters, cartridges, accessories, and other supplies for use in the purification of water. Products include consumables and replacement parts for use with a variety of water purification systems.
Source or feed water may be tap water, water that is pre-treated by the system, or pretreated water that is drawn from a reservoir or tank. Water systems typically produce water rated as Type I, II, III, or IV.
Type I or ultrapure Type I water is defined by resistivity and TOC levels (total organic compounds, measured in parts per billion (ppb). Type I water is required for ICPMS, AAS, FAAS, GFAAS, HPLC, IC, and ICPAES methods, molecular biology, cell and tissue culture, electrochemistry, and electrophoresis.
Type II water is suitable for ELISA and RIA test methods, buffer and reagent preparation, and spectrophotometry. It also has a specific requirement for resistivity. Type III water is used for media preparation, glassware washing and rinsing, and other non-critical applications. Type IV water is typically used as feed water for Type I and Type II water purification systems.
Replacement water purification parts – filters and cartridges – are key components of these systems and must be changed according to specifications to maintain the promised water quality.
Filtered Search Results
Thermo Scientific™ Barnstead™ Easypure™ RoDi
This item is no longer available and has been replaced by the next generation of Barnstead Water Purification Systems.
Thermo Scientific™ Accessories for the Barnstead™ TII Type 2 Water System
Integrate the accessories for the Thermo Scientific™ Barnstear™ TII Type 2 Water System with the system itself for a more complete laboratory solution.
Feedwater Pressure | 30 to 100 psig (2 to 6.9 bar) |
---|---|
Height (Metric) | 49.5 cm |
Electrical Requirements | 100/240 VAC 50/60 Hz |
Depth (English) | 18.5 in. |
Width (English) | 13.5 in. |
RO Flow Rate | 12 L/hr. |
Resistivity | 15 Mohm.cm at 25°C |
Conductivity | 0.067 to 0.1 µS/cm |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 34.3 cm |
Total Organic Carbon | 1 to 5 ppb |
For Use With (Equipment) | Barnstead™ TII Type 2 Water System |
Depth (Metric) | 47 cm |
Product Water Type | Type 2 |
Voltage | 100/240 VAC |
Purified Water Flowrate Field | 1 L/min. |
Frequency | 50/60 Hz |
Feedwater Temperature (Metric) | 4°C to 40°C |
Bacterial Content | <1 CFU/mL |
Height (English) | 19.5 in. |
Thermo Scientific™ Barnstead™ Smart2Pure™ Pro Water Purification System
All in One ! The Smart2Pure™ Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water.
Operating Pressure | 1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Permeate performance | 16 L/hr. at 10°C |
RO Flow Rate | 16 L/hr. |
Conductivity | Type 1: 0.055μS/cm and Type II: 0.067 to 0.1μS/cm |
Particles >0.2µM/mL | <1 |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | Up to 1 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT and 1/2 in. NPT |
Depth (Metric) | 300 mm |
Product Water Type | Type 1 and 2 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.12 kW |
Bacterial Content | <0.01 CFU/mL |
Bacterial retention | 0.99 |
Weight (Metric) | 22 kg |
Feed Water Monitoring | No |
Thermo Scientific™ Aquanex™ Ultrapure Tap to Type I/II Water Purification System with Touch Smart Dispenser
Count on the Thermo Scientific™ Aquanex™ Ultrapure Water Purification System for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment
Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with this compact, all-in-one water system.
Operating Pressure | 1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Net Weight (Metric) | 22 kg |
Particles >0.2µM/mL | <1 |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 400 mm |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.06 kW |
Bacterial Content | <0.01 CFU/mL |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System
Produce Type 1 ultrapure water while conserving space with the compact and flexible Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 18.6 in. |
Width (English) | 13 in. |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
TOC Monitor with UV Intensity Monitoring | Yes |
Width (Metric) | 330 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 472 mm |
Product Water Type | Type 1 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Height (English) | 24.2 in. |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Sterile filter for use with Barnstead™ water purification systems; can be autoclaved up to 5 times.
Fisherbrand™ Accu20 Ultrapure Water System
Fisherbrand™ Accu20 Ultrapure Water System used to produce Type I ultrapure water and RO water on demand from tap water directly.
Feedwater Pressure | 15 to 90 psi (1 to 6 bar ) |
---|---|
Height (Metric) | 48 cm |
Flow Rate | RO water (at 25°C ): >0.5L/min.; Ultrapure water ( Type I ) (at 25°C ): >0.5L/min. |
Depth (English) | 20 in. |
Length (Metric) | 30 cm |
Depth (Metric) | 51 cm |
Resistivity | 18.2 Mohm.cm |
Length (English) | 76.2 in. |
Model | Accu20 |
Conductivity | RO water at 25°C: Typically <20μS/cm |
Temperature Range (Metric) | 5°C to 45°C |
Height (English) | 18.8 in. |
Fisher Scientific™ Accu100 Ultrapure Water System
Ultrapure water for critical laboratory applications. Fisherbrand™ Accu100 Ultrapure Water System used to produce Type I ultrapure water from RO, distilled or deionized water.
Particle Size | <1/mL |
---|---|
Height (Metric) | 44 cm |
Flow Rate | 1.0 to 1.5 L/min. at 25°C |
Length (Metric) | 21 cm |
Depth (Metric) | 35 cm |
Resistivity | 18.2 Mohm.cm at 25°C |
Length (English) | 8.26 in. |
Model | Accu100 |
Feedwater Source | Distilled, DI, RO, EDI |
Temperature Range (Metric) | 5°C to 45°C |
Bacterial Content | <0.1 CFU/mL |
Height (English) | 17.3 in. |
Fisherbrand™ ACCU500 Water Purification System
Produces ultrapure and reverse osmosis water from tap water directly with no additional pre-treatment filters.
Thermo Scientific™ Barnstead™ GenPure™ xCAD Water Purification System
This item is no longer available. The recommended replacement is Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055 µS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | R 3/4 in. |
Depth (Metric) | 330 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Remote Dispenser | Yes |
Bacterial Content | <1 CFU/mL |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ Classic Stills
Remove inorganic solids, organics, bacteria and pyrogens from your water with Thermo Scientific™ Barnstead™ Classic Stills.
Frequency | 50/60 Hz |
---|---|
Certifications/Compliance | UL, cUL |
Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System
Convert tap water into high-purity water with the Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System, a complete solution integrating purification and tank.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 1500 mm |
Net Weight (Metric) | 66 kg |
Resistivity | 10 to 1 Mohm.cm |
Conductivity | 0.1 to 1.0μS/cm |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 450 mm |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 580 mm |
Product Water Type | Type 2 |
Temperature Range (Metric) | 2°C to 35°C |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System, with Installation
Simultaneously dispense Type 1 ultrapure water from up to three dispensers using the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus system.
Operating Pressure | 0.1 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 13 in. |
Width (English) | 14.6 in. |
Resistivity | 18.2 Mohm.cm at 25°C |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
Width (Metric) | 372 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | Up to 2 L/min. |
Feedwater Connector | 3/4 in. |
Depth (Metric) | 330 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Bacterial Content | <0.1 CFU/mL |
Height (English) | 24 in. |
Feed Water Monitoring | Integrated |